给一个命令流，建议找本ansys的书仔细看看学习一下/prep7 !进入prep7处理器k,1$k,2,6$k,3,12$k,4,18$k,5,24$k,6,6,8$k,7,12,8$k,8,18,8 !创建关键点l,1,2$l,2,3$l,3,4$l,4,5$l,1,6$l,6,7$l,7,8$l,5,8$l,2,6 !创建线l,3,7$l,4,8$l,6,3$l,3,8et,1,link1 !定义单元类型r,1,0.01$r,2,0.005$r,3,0.0125 !定义单元实常数mp,ex,1,2.1e11 !定义材料属性mp,prxy,1,0.3lsel,s,tan1,y$latt,1,1,1 !选择水平线并定义属性lsel,s,loc,y,1,7$lsel,r,loc,x,6,18$latt,1,2,1 lsel,s,loc,y,1,7$lsel,u,loc,x,6,18$latt,1,3,1 allsel,alllesize,all,,,1 !定义各个线所划分的单元个数lmesh,all !对所有线进行单元划分finish /solu !进入solu处理器antype,0 !定义分析类型dk,1,ux,,,,uy !约束关键点1的Ux,Uydk,5,uy !约束关键点5的Uyfk,6,fy,-200000 !关键点6施加向下的荷载200000Nfk,8,fy,-200000 !关键点8施加向下的荷载200000Nfk,2,fy,-400000 !关键点2施加向下的荷载400000Nfk,3,fy,-400000 !关键点3施加向下的荷载400000Nfk,4,fy,-400000lplot !绘制线solve !执行求解finish/post1 !进入后处理器pldisp !绘制变形图etable,mforce,smisc,1 !定义单元轴力表etable,mstress,ls,1 !定义单元应力表plls,mforce,mforce,1 !绘制单元轴力图plls,mstress,mstress,1 !绘制单元应力图prrsol
RitaQinQin
