首页

> 期刊论文知识库

首页 期刊论文知识库 问题

molecules期刊投稿

发布时间:

molecules期刊投稿

四区。影响因子(IF)是汤森路透制作的期刊引用报告中的一个数据。影响因子不是评价期刊影响力最客观的标准。一般来说,影响因子越高,期刊的影响力越大。期刊名分子结构杂志出版周期为半月刊中科院杂志分区物理化学分类下的四区期刊近四年影响因子。

molecules期刊投稿图形摘要必须要有图形摘要是论文主要调查结果的简明形象化概要,如今在Cell系列等越来越多的国际期刊中,要求论文要有图形摘要。以下是我们总结的图形摘要写作要领:一、图形要一针见血,不言自明。一般来说,好的图形摘要应当能准确表达出文章的主旨信息,且图形清晰、可读性强。因此,在确保图形聚焦文章中主要研究结果的基础之上,要尽量避免分散读者的注意力,而这就需要图形摘要尽量使用直观且不需要揣测含义的图形,如一些约定俗成的图例或公知公用的符号等,可让读者可依据已有经验和所有掌握的知识在短时间内领会其所代表的含义,从而缩短认知过程。二、切忌图不对文。图形摘要的主要目的在于将一篇文章的最重要、最精华的信息提炼成为一张图片,便于读者理解,抑或重新绘制来概括文章研究的新发现或新成果。因而研究者在开始制作图片之前,理应重新审视自己的文章,并确定什么是最值得展示给读者的信息。

molecules投稿状态

你知道怎么回复审稿意见么

朋友,根据我多年从事文字工作的经验,我认为:如果投稿更有针对性,命中率会更高一些。这就关系到,你是哪里的?干什么的?写的稿件是什么体裁?什么内容?如果说投稿的话,最好投当地的报刊、网络或者是你从事的职业报刊发表,要投哪个媒体首先要研究哪个媒体,看它需要什么内容、什么体裁、什么格式的稿件,“对症下”,这样会更轻松一些、方便一些,命中率会更高一些。如果你能够告诉我你的具体情况(干什么工作,哪里的,写的小说的大致内容等),我可以给你一些建议。我1993年开始在部队时开始发表各类文章,包括:报告文学、新闻、诗歌、散文、小说、评论等体裁的,到目前发表的大约5000篇左右吧,有40多篇获奖。另外:投稿时,第一要有信心,第二要投对报刊媒体,这两点非常重要。祝你成功!

molecules期刊投稿图形摘要必须要有图形摘要是论文主要调查结果的简明形象化概要,如今在Cell系列等越来越多的国际期刊中,要求论文要有图形摘要。以下是我们总结的图形摘要写作要领:一、图形要一针见血,不言自明。一般来说,好的图形摘要应当能准确表达出文章的主旨信息,且图形清晰、可读性强。因此,在确保图形聚焦文章中主要研究结果的基础之上,要尽量避免分散读者的注意力,而这就需要图形摘要尽量使用直观且不需要揣测含义的图形,如一些约定俗成的图例或公知公用的符号等,可让读者可依据已有经验和所有掌握的知识在短时间内领会其所代表的含义,从而缩短认知过程。二、切忌图不对文。图形摘要的主要目的在于将一篇文章的最重要、最精华的信息提炼成为一张图片,便于读者理解,抑或重新绘制来概括文章研究的新发现或新成果。因而研究者在开始制作图片之前,理应重新审视自己的文章,并确定什么是最值得展示给读者的信息。

molecules投稿经验

投稿Energy,35天后返回修改,给的大修,求教有经验的虫友如何回复审稿意见比较好。另外,为什么附件里只有一个人的审稿人意见?Dear***, The review of this paper is now complete, and I am including the Reviewers' reports (directly at the end of this email and sometimes as attachments).  As you can see, one Reviewer recommends rejection, and the others recommend possible reconsideration after major revisions.  If you are able to revise the manuscript thoroughly in response to the Reviewers' comments, I believe that it would be suitable for second review.  I should add that, in view of the strong criticisms, anything but a thorough response and revision would just be an unfortunate waste of time. Once you have revised the paper accordingly, please submit with it a note describing in detail your response to these comments and a separate copy of the revised paper marked up to indicate where the revisions were made. NOTE: Upon submitting your revised manuscript, please upload the source files for your article. For additional details regarding acceptable file formats, please refer to the Guide for Authors at: When submitting your revised paper, we ask that you include the following items: Manuscript and Figure Source Files (mandatory) We cannot accommodate PDF manuscript files for production purposes. We also ask that when submitting your revision you follow the journal formatting guidelines.  Figures and tables may be embedded within the source file for the submission as long as they are of sufficient resolution for Production. Refer to the Guide for Authors for additional Highlights (mandatory) Highlights consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). See the following website for more information Please note that this journal offers a new, free service called AudioSlides: brief, webcast-style presentations that are shown next to published articles on ScienceDirect (see also ). If your paper is accepted for publication, you will automatically receive an invitation to create an AudioSlides presentation. Thank you for your interest in ENERGY. Sincerely, Milorad Lj Bojic, . Editor Reviewers' comments: Reviewer #1: Through a thorough reading and reviewing, the reviewer suggests that the following problems should be addressed and the manuscript should be modified. 1. Keywords should contain "Lauric acid".   2.  XRD results reveal that the IKL and LA/IKL have the same diffraction peak at 2 of , indicating that the LA molecules are mainly located on the IKL surface rather than the inner-layer. Please discuss in more detail. 3. In the FTIR spectra, there are no peaks at 3670 and 3624 cm-1, please check why? 4. The authors note that the LA drives the IKL to exfoliate, which may afford an increase of specific surface area for LA/IKL. However, BET results reveal an obvious reduction of specific surface area. Is there any other reason for this reduction, for example the LA/IKL aggregation? Since SEM images imply that LA/IKL has larger size than IKL. 5. Please check the result of the impregnation ratio of LA in LA/IKL ( wt%), which should be about 58 wt%. Reviewer #2: This manuscript reported a novel form-stable phase change material (FSPCM) for thermal energy storage which was prepared by*******. I have read the whole paper and find that this study is simple and less novelty. The very similar work been published in Journal of Materials Science & Engineering (Preparation and Thermal Properties of Binary Organic / kaolin Composites as Shape-stabilized Phase Change Material for Thermal Energy Storage, 2013, 31, 268-272.) In addition, the Ref. 19 and Ref. 29 have been cited repeatedly. Therefore, this paper in present stage could not be accepted for publication in Energy. Reviewer #3: COMMENTS: (1) The authors need to be careful in their English usage. Therefore, full of the paper should be reviewed. Especially, some sentences in the introduction section are lack of continuity. (2) What is LOI in Table 1? Please clearly write it. (3) On page 4, line 7, "The suspension was ultrasonic at 70 oC for 2 h…." should be corrected as "The suspension was kept in ultrasonic bath at 70 oC for 2 h…." (4) The performances of energy storage and release of composite PCMs are substantially dependent on their thermal conductivity. Therefore, the thermal conductivity of the composite PCM is important parameter in thermal energy storage applications.  Please clarify the why did the authors measure the thermal conductivity value of the composite PCM. It is possible; the authors should be provided the thermal conductivity value of the composite PCM. (5) There are some writing errors in the text. For example; ---On page 1, line 24, "kaolinite is one ….. " should be "Kaolinite is one ….."---On page 1, line 59, "In recently years, ….." should be corrected as "In recent years , …."---On page 5, line 1, "Differential scanning calorimety (DSC) was carried out….." should be     corrected as "Differential scanning calorimety (DSC) measurements were carried out…."---On page 5, line 15, "The morphology and microstructure was….." should be corrected as "The morphology and microstructure were….."---On page 6, line 58, "FTIR spectroscopy and the results is shown….." should be corrected as "FTIR spectroscopy and the results are shown .." ---On page 7, line 19, "The adsorption peaks at 2923 cm-1 and 2854 cm-1 is caused….." should be corrected as "The adsorption peaks at 2923 cm-1 and 2854 cm-1 are caused.." ---On page 8, line 19, "…… of mespores below …..." should be corrected as "…… of mesopores below ……."---On page 8, line 47, "……SEM images were made." should be "…SEM images were obtained. ---On page 9, in the caption of section "thermal properties…..." should be corrected as "Thermal properties……" (4) The following papers can be useful to more clearly understanding the form-stable composite PCM: ---Capric-myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage, Renewable Energy  Volume: 33   Issue: 12   DEC 2008 Pages: 2599-2605    ---Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings, Applied Thermal Engineering, Volume 59, Issues 1-2, 25 September 2013, Pages 336-347 ---Structures and thermal properties of fatty acid/expanded perlite composites as form-stable phase change materials Energy and Buildings, Volume 68, Part A, January 2014, Pages 587-592 ---Preparation, characterization and thermal properties of lauric acid/expanded perlite as novel form-stable composite phase change material, Chemical Engineering Journal  Volume: 155   Issue: 3   Pages: 899-904   Published: DEC 15 2009 ---Preparation, thermal properties and thermal reliability of eutectic mixtures of fatty acids/expanded vermiculite as novel form-stable composites for energy storage Journal of Industrial and Engineering Chemistry  Volume: 16   Issue: 5   Pages: 767-773   Published: SEP 25 2010

你按审稿人的建议认认真真地修改,特别是第二个审稿人,说你的论文simple and less novelty,这是很大的硬伤,这个问题不解决,很难录用的。还有你们细节太不注意了,英语写作也要提高。

好好根据审稿意见修改文章,特别是意见不好的那位。每一天都要回复,并说明文章是怎么带的,或者对审稿意见进行解释。

朋友,根据我多年从事文字工作的经验,我认为:如果投稿更有针对性,命中率会更高一些。这就关系到,你是哪里的?干什么的?写的稿件是什么体裁?什么内容?如果说投稿的话,最好投当地的报刊、网络或者是你从事的职业报刊发表,要投哪个媒体首先要研究哪个媒体,看它需要什么内容、什么体裁、什么格式的稿件,“对症下”,这样会更轻松一些、方便一些,命中率会更高一些。如果你能够告诉我你的具体情况(干什么工作,哪里的,写的小说的大致内容等),我可以给你一些建议。我1993年开始在部队时开始发表各类文章,包括:报告文学、新闻、诗歌、散文、小说、评论等体裁的,到目前发表的大约5000篇左右吧,有40多篇获奖。另外:投稿时,第一要有信心,第二要投对报刊媒体,这两点非常重要。祝你成功!

molecules期刊中文

在文中引用时要做好相应的标注。例如,引用时要在XX中在参考文献1,中注明引自“阮诗玮,郑敏麟.中医藏象实质细胞生物学假说之一。

molecules期刊投稿图形摘要必须要有图形摘要是论文主要调查结果的简明形象化概要,如今在Cell系列等越来越多的国际期刊中,要求论文要有图形摘要。以下是我们总结的图形摘要写作要领:一、图形要一针见血,不言自明。一般来说,好的图形摘要应当能准确表达出文章的主旨信息,且图形清晰、可读性强。因此,在确保图形聚焦文章中主要研究结果的基础之上,要尽量避免分散读者的注意力,而这就需要图形摘要尽量使用直观且不需要揣测含义的图形,如一些约定俗成的图例或公知公用的符号等,可让读者可依据已有经验和所有掌握的知识在短时间内领会其所代表的含义,从而缩短认知过程。二、切忌图不对文。图形摘要的主要目的在于将一篇文章的最重要、最精华的信息提炼成为一张图片,便于读者理解,抑或重新绘制来概括文章研究的新发现或新成果。因而研究者在开始制作图片之前,理应重新审视自己的文章,并确定什么是最值得展示给读者的信息。

molecules影响因子5分算优秀。分子(ISSN1420-3049,CODEN:MOLEFW)是合成有机化学和天然产物化学的开放获取期刊。所有文章都经过同行评审,并在接受后不断发表。分子由瑞士巴塞尔的MDPI出版。我们的目的是鼓励化学家尽可能多地发布其实验细节,尤其是合成程序和表征信息。实验段的长度没有限制。此外,化合物样品的可用性也被公布,并被视为重要信息。鼓励作者通过非营利性国际组织分子多样性保护国际组织(MDPI)注册或存放其化学样品。1996年已经启动了分子,以保护和利用化学信息和化学物质的分子多样性。

molecules期刊编辑

物理评论A(英文名称:Physical Review A,简称PRA) 美国物理学会(APS)旗下期刊,该杂志旨在发表物理学中原子、分子、光学及其相关领域内的最新重要研究进展,主要包括: Fundamental concepts 量子力学中的基本概念 Quantum information 量子信息 Atomic and molecular structure and dynamics 原子分子结构及动力学 Atomic and molecular collisions and interactions 原子分子碰撞及相互作用 Photon, electron, atom, and molecule interactions with solids and surfaces 光子、电子、原子分子与固体及表面相互作用 Clusters (including fullerenes) 簇团等 Atomic and molecular processes in external fields, including interactions with strong fields and short pulses 强外场作用下的原子分子动力学过程 Matter waves and collective properties of cold atoms and molecules 物质波等 Quantum optics, physics of lasers, nonlinear optics, classical optics 量子光学,激光,非线性光学,经典光学 该杂志目前编委情况: 主编 Gordon W. F. Drake, University of Windsor 副主编 Dirk Jan Bukman, APS Editorial OfficeLee A. Collins, Los Alamos National LaboratoryFranco Dalfovo, Università di TrentoMark Hillery, Hunter CollegeKeith B. MacAdam, University of KentuckyFrank Narducci, Naval Air Systems CommandThomas Pattard, APS Editorial OfficeMark Saffman, University of WisconsinBarry C. Sanders, University of Calgary 高级助理编辑 Margaret FosterJill M. Gargano 助理编辑 Jihane MimihHernan D. Rozenfeld 杂志的最新动态:2013年8月开始,编辑在每一期期刊中会挑选出很少一部分最重要的论文(文章最上面会标记Editors’ Suggestions)。

四区。影响因子(IF)是汤森路透制作的期刊引用报告中的一个数据。影响因子不是评价期刊影响力最客观的标准。一般来说,影响因子越高,期刊的影响力越大。期刊名分子结构杂志出版周期为半月刊中科院杂志分区物理化学分类下的四区期刊近四年影响因子。

molecules期刊投稿图形摘要必须要有图形摘要是论文主要调查结果的简明形象化概要,如今在Cell系列等越来越多的国际期刊中,要求论文要有图形摘要。以下是我们总结的图形摘要写作要领:一、图形要一针见血,不言自明。一般来说,好的图形摘要应当能准确表达出文章的主旨信息,且图形清晰、可读性强。因此,在确保图形聚焦文章中主要研究结果的基础之上,要尽量避免分散读者的注意力,而这就需要图形摘要尽量使用直观且不需要揣测含义的图形,如一些约定俗成的图例或公知公用的符号等,可让读者可依据已有经验和所有掌握的知识在短时间内领会其所代表的含义,从而缩短认知过程。二、切忌图不对文。图形摘要的主要目的在于将一篇文章的最重要、最精华的信息提炼成为一张图片,便于读者理解,抑或重新绘制来概括文章研究的新发现或新成果。因而研究者在开始制作图片之前,理应重新审视自己的文章,并确定什么是最值得展示给读者的信息。

相关百科

热门百科

首页
发表服务