中国科学院研究生院学报

1. HONG Youshi, YE Yugong and XIA Xiaoxin, The Effects of the Size of the Second Phase Particles on the Mechanical Properties of a Low Alloy Steel. Mechanical Behaviour of Materials, Proceedings of ICM4, August 1983, Vol.2, p.849-855.2. HONG Youshi and LIANG Kaiming, An Investigation on Stress Corrosion Cracking (SCC) Behaviour of Cr-Mo Steels. Advances in Fracture Research, Proceedings of ICF6, December 1984, Vol.4, p.2403-2410.3. HONG Youshi, W. R. Tyson and B. Faucher, Effect of Rare Earth Additions on Fracture Properties of 2.25Cr-1Mo Steels. Acta Metallurgica Sinica (English Edition) Ser. A, (1989), Vol.2, p.63-68.4. HONG Youshi, LU Yonghua and ZHENG Zhemin, Initiation and Propagation of Short Fatigue Cracks in a Weld Metal. Fatigue Fract. Engng Mater. Struct., (1989), Vol.12, p.323-331.5. HONG Youshi, LU Yonghua and ZHENG Zhemin, Short Fatigue Crack Behaviour in Iso-Stress Specimens. Acta Metall. Sinica. (English Edition) Ser. A, (1990), Vol.3, p.276-281.6. HONG Youshi, K. J. Miller and M. W. Brown, Complex Stress Functions and Plastic Zone Sizes for Notch Cracks Subjected to Various Loading Conditions. Fatigue Fract. Engng Mater. Struct., (1991), Vol.14, p.237-258.7. HONG Youshi, LU Yonghua and ZHENG Zhemin, Orientation Preference and Fractal Character of Short Fatigue Cracks in a Weld Metal. J. Mater. Sci., (1991), Vol.26, p.1821-1826.8. HONG Youshi, M. W. Brown and K. J. Miller, Fatigue Crack Growth from a Circular Notch under High Levels of Biaxial Stress. Fatigue Fract. Engng Mater. Struct., (1992), Vol.15, p.1185-1197.9. FANG Biao, HONG Youshi and BAI Yilong, Experimental and Theoretical Study on Numerical Density Evolution of Short Fatigue Cracks. Acta Mechanica Sinica, (1995), Vol.11, p.144-152.10. 洪友士，顾子晏，方飙，疲劳短裂纹萌生的损伤特征和计算机模拟，《机械强度》 (1995), Vol.17, No.3, p.88-93.11. HONG Youshi, GU Ziyan, FANG Biao and BAI Yilong, Collective Evolution Characteristics and Computer Simulation of Short Fatigue Cracks. Philosophical Magazine A, (1997), Vol.75, no.6, p.1517-1531.12. HONG Youshi and ZHENG Xiuhua, Experimental Investigation on Evolution Process of Dimpled Fracture. Proceedings of 9th International Conference on Fracture, April 1997, Vol.5, p.2441-2448.13. QIAO Yu and HONG Youshi, A Theoretical Analysis on Stochastic Behaviour of Short Cracks and Fatigue Damage of Metals, Acta Mechanica Solida Sinica (1997), Vol.10, no.4, p.352-358.14. QIAO Yu and HONG Youshi, An Analysis of Collective Damage for Short Fatigue Cracks Based on Equilibrium of Crack Numerical Density, Engineering Fracture Mechanics, (1998), Vol.59, no.2, p.151-163.15. HONG Youshi and QIAO Yu, Analysis of Damage Moments in the Collective Evolution of Short Fatigue Cracks. Key Engineering Materials, (1998), Vol.145-149, p.399-404.16. 乔宇，洪友士，基于局域分析的裂纹群体损伤演化随机模型。《力学学报》(1998), Vol. 30, no.5, p.564-571.17. HONG Youshi, QIAO Yu, LIU Na and ZHENG Xiuhua, Effect of Grain Size on Collective Damage of Short Cracks and Fatigue Life Estimation for a Stainless Steel, Fatigue & Fracture of Engineering Materials & Structures, (1998), Vol.21, no.11, p.1317-1326.18. WANG Huicai and HONG Youshi, Application of Enthalphy Method for Moving Boundary Problem in Laser Surface Melting, Acta Mechanica Solida Sinica, (1999), Vol.12, no.3, p.198-205.19. HONG Youshi, QIAO Yu, LIU Na and ZHENG Xiuhua, Collective Damage of Short Cracks and Fatigue Life Estimation for Metallic Materials (Keynote paper), Fatigue ’99, Proceedings of the Seventh International Fatigue Congress, Beijing, June 1999, Vol.1, p.337-344.20. QIAO Yu and HONG Youshi, Singularity Characteristics for a Lip-Shaped Crack Subjected to Remote Biaxial Loading, International Journal of Fracture, (1999), Vol.96, no.3, p.203-214.21. HONG Youshi and QIAO Yu, An Analysis on Overall Crack-Number-Density of Short-Fatigue-Cracks, Mechanics of Materials, (1999), Vol.31, p.525-534.22. YU Hualong and HONG Youshi, Collective Evolution Characteristics and Computer Simulation of Voids Near the Crack Tip of Ductile Metal, Key Engineering Materials, (2000), Vol.183-187, p.157-162.23. FU Min, HONG Youshi, MA Youli and LI Shiqiong, Experiments and Analyses on Tensile Behaviour of a TiAl Alloy with Lamellar Structure, Journal of Materials Science, (2000), Vol.35, p.4937-4943.24. WU Xiaolei and HONG Youshi, Microstructure of Zr-alloyed coating using pulsed laser, Surface and Coatings Technology, (2000), Vol.132, p.194-197.25. WU Xiaolei and HONG Youshi, Microstructure and mechanical properties at TiC/Ni-alloy interfaces in laser-synthesized coatings, Mater Sci Eng A, (2001), Vol.318A, p.15-21.26. WU Xiaolei and HONG Youshi, Fe-based thick amorphous-alloy coating by laser cladding, Surface and Coatings Technology, (2001), Vol.141, p.141-144.27. HONG Youshi, ZHENG Liang and QIAO Yu, Simulations and experiments of stochastic characteristics for collective short fatigue cracks of steels, Fatigue Fract. Engng Mater. Struct. (2002), Vol.25, no.5, p.459-466.28. WU Xiaolei, TAO Nairong, HONG Youshi, XU B, LU Jian, LU Ke. Microstructure and Evolution of Mechanically-Induced Ultrafine Grain in Surface Layer of Al-Alloy Subjected to USSP, Acta Materialia, 2002, Vol.50, no.8, p.2075-2084.29. HONG Youshi, AN Zhongsheng and WANG Huicai, Numerical Simulation for Temperature Field Evolution of Metallic Alloy Surface due to Pulsed Laser Treatment, Key Engineering Materials, (2003), Vols.243-244, p.481-486.30. HONG Youshi, ZHAO Yibing, AN Zhongsheng and WANG Huicai, Surface Layer Rapid Melting-Solidification due to Pulsed Laser Irradiation and Its Impact on Microstructure and Fatigue Resistance of Metallic Alloy, (Invited plenary lecture) Proceedings of International Conference on Heterogeneous Material Mechanics (Program and Book of Abstract), Chongqing, June 2004, p.122.31. HONG Youshi and ZHOU Cheng-en, Characteristics of Very-High-Cycle Fatigue for a High Carbon Low Alloy Steel, Proceedings of International Congress on Theoretical and Applied Mechanics, Warsaw, Poland, August 2004.32. DENG Zhongmin, ZHAO Yibing and HONG Youshi, Influence of Microstructure on Materials Fatigue Life with Different MSZ Coverage Rates under Contact Loads, Key Engineering Materials, (2003), Vols.243-244, p.219-224.33. 安中胜，王会才，赵亦兵，洪友士，脉冲激光导致不锈钢表层温度场演化的模拟。《中国科学院研究生院学报》(2003), Vol.20, no.3, p.309-315.34. 洪友士，赵亦兵，安中胜，王会才，脉冲激光致合金表层快速熔凝及其对微结构和力学性能的影响。《材料的宏微观力学与强韧化设计》主编：黄克智，王自强，p.215-245, 清华大学出版社，Springer，北京，2003年7月。35. 周承恩，谢季佳，洪友士，超高周疲劳研究现状及展望。《机械强度》(2004), Vol.26, no.5, p.526-533.36. 洪友士，脉冲激光熔凝的不锈钢表层的微结构和力学性能。《国家杰出青年科学基金实施十周年纪念文集》（材料科学分册），国家自然科学基金委员会工程与材料科学部编，p.25-29, 北京，2004年9月。37. 周承恩, 洪友士, GCr15钢超高周疲劳行为的实验研究。《机械强度》(2004), Vol.26(S), p.157-160.38. 邓忠民，刘敬，赵亦兵，洪友士，激光毛化技术对18-8不锈钢疲劳性能的研究。《机械强度》(2004), Vol.26(S), p.154-156.39. WU Xiaolei, TAO Nairong, HONG Youshi, LIU G, XU B, LU Jian and LU Ke, Strain Induced Grain Refinement of Cobalt during Surface Mechanical Attrition Treatment, Acta Materialia, (2005), Vol.53, 681-691.40. WU Xiaolei, TAO Nairong, HONG Youshi, B, LU Jian and LU Ke, Martensite Transformation and Twinning Deformation in fcc Cobalt during Surface Mechanical Attrition Treatment, Scripta Materialia, (2005), Vol.52, No.7, p.547-551.41. Wu X, Tao N, Hong Y, Lu J, Lu K. Localized Solid-State Amorphization at Grain Boundaries in Nanocrystalline Al Solid Solution Subjected to Surface Mechanical Attrition. Journal of Physics D: Applied Physics, (2005), Vol. 38, p.4140-4143.42. Hong Youshi and Zhao Yibing, Microstructure and Fatigue Resistance of a Stainless Steel with its Surface subjected to Pulsed Laser Treatment, in G.C.Sih and T .Vu-Khanh eds. Materials for Safety and Health, Mesoscopic and Multiscale Consideration in Modern Science and Engineering. 2005, p.351-357.43. 谢季佳，上官丰收，武晓雷，洪友士，确定断裂表面晶体学取向的电子背散射衍射方法。《电子显微学报》(2005), Vol.24, no.6, p.547-550.44. Zhou Cheng’en, Qian Gui’an, Hong Youshi. Fractography and Crack Initiation of Very-High- Cycle Fatigue for a High Carbon Low Alloy Steel. Key Engineering Materials, (2006), Vols.324-325, p.1113-1116.45. 张骥, 董满生, 葛斐, 洪友士, 计及轴向压力的方管节点塑性铰线模型。《固体力学学报》(2006), Vol.27(2), p.127-134.46. 董满生, 葛斐, 洪友士, 曲线形水中悬浮隧道的温度内力研究。《工程力学》(2006), Vol.23, Sup.1, p.21-24.47. 葛斐, 董满生, 惠磊, 洪友士, 水中悬浮隧道锚索在波流场中的涡激动力响应。《工程力学》(2006), Vol.23, Sup.1, p.217-221.48. Xie Jijia, Wu Xiaolei and Hong Youshi. Shear Bands at the Fatigue Crack Tip of Nanocrystalline Nickel. Scripta Materialia (2007), Vol.57, p.5-8.49. Lan Jiaoxia, Hong Youshi. Micromechanics Modelling of Strength for Nanocrystalline Copper. Archive of Applied Mechanics (2007), published Online First (1432-0681).50. Hong Youshi, Shangguan Fengshou, Xie Ziling. Grain Refinement and Hardness Increase of Copper Subjected to High Pressure Torsion. TMS 136th Annual Meeting & Exhibition, Orlando, USA, February 2007, p.121.51. 上官丰收, 谢季佳, 洪友士, 高压扭转致纯铜试样晶粒细化及与应变的关系。《材料研究学报》(2007), Vol.21, No.1, p.72-76.52. 谢子令，武晓雷，洪友士，微纳米晶金属的应变率敏感性及应变硬化行为分析。《固体力学学报》(2007), Vol.28, no.1, p.43-48.53. 葛 斐，惠 磊，洪友士，水中悬浮隧道锚索在剪切流中的涡激响应。《中国科学院研究生院学报》(2007), Vol.24, No.3, p.351-356.54. 谢季佳，何发泉，洪友士，确定ZnO晶体生长方向的电子背散射衍射方法。《电子显微学报》(2007), Vol.26, No.1, p.14-18.55. DONG Man-sheng, GE Fei, ZHANG Shuang-yin, HONG You-shi. Dynamic Equations for Curved Submerged floating Tunnel. Applied Mathematics and Mechanics, (2007), Vol.28, No.10, p.1299-1308.56. 董满生, 葛斐, 惠磊, 洪友士. 水中悬浮隧道研究进展。《中国公路学报》(2007), Vol.20, No.4, p.101-107.57. 葛斐，惠磊，洪友士. 水中悬浮隧道锚索非线性涡激振动的研究. 《中国公路学报》(2007), Vol.20, No.6, p.85-89.58. 谢季佳，段桂花，武晓雷，洪友士. 电解沉积纳米镍退火析出相的EBSD分析. 《中国体视学与图像分析》(2007), Vol.12, No.4, p.250-253.59. 葛斐，惠磊，洪友士，水中悬浮隧道在波浪场中非线性动力响应的研究。《应用力学学报》(2008), Vol.25, No.2, p.207-211.60. 惠磊, 葛斐, 洪友士. 水中悬浮隧道在冲击载荷下的计算模型与数值模拟.《工程力学》 (2008), Vol.25, No.2, p.209-213.61. 葛斐，惠磊，洪友士. 波浪场中水中悬浮隧道动力响应的研究. 《工程力学》, (2008), Vol.25, No.6, p.188-194.62. Wang Zhijia, Wu Xiaolei and Hong Youshi. Torsion Fracture Behavior of Drawn Pearlitic Steel Wires with Different Heat Treatments. Advanced Materials Research, (2008), Vol.33-37, p.41-46.63. Xie Jijia, Wu Xiaolei and Hong Youshi. Study on fatigue crack nucleation of electrodeposited nanocrystalline nickel. Advanced Materials Research, (2008), Vol.33-37, p.925-930.64. 兰姣霞, 王志甲, 洪友士. 高能气动喷丸致纯铜细晶化的实验与模拟.《中国科学院研究生院学报》(2008), Vol.25, No.2, p.172-176.65. Hong Youshi, Wu Xiaolei, Liu Junliang, Wand Junyi, Shen Wei, Wang Zhijia and Xie Ziling. Investigation of Torsion Ductility Degradation of High Strength Steel Wire. Baosteel BAC 2008, Shanghai, China, September 2008. 66. 洪友士，钱学森物理力学思想与力学所的材料力学性能研究。《钱学森科学贡献暨学术思想研讨会论文集》p.184-189, 中国科学技术出版社，2001年12月。67. 洪友士（主编），《应用力学进展（祝贺郑哲敏先生八十华诞应用力学学术报告会论文集）》科学出版社，北京，2004年9月。68. 洪友士，应用力学和技术科学的开拓者和领路人— 著名力学家郑哲敏院士。《中国科学院院刊》(2004), Vol.19, no.6, p.468-471。69. 洪友士，郑哲敏对应用力学和技术科学的贡献。《力学进展》(2005), Vol.35, no.1, p.1-4.70. 洪友士，力学研究所五十年。《力学进展》(2006), Vol.36, no.1, p.1-6.

（1）稿件需用计算机打印，并寄软盘。用字要规范，字迹和图要清晰；打印的稿件需加大字号和行距。作者可通过E-mail投稿，但不要和文字稿重复。（2）题名（含中英文）。应符合索引要求，一般不超过20个字。以简明、确切的词语反映文章的内容，并符合题录。（3）作者姓名（含中英文）。英译名用汉语拼音，姓全部大写，名字第一字母大写，双名间加连字符。（4）作者单位。包括部门、单位、省市名，邮编。英文邮编之后加列国名。（5）摘要（含中英文）应尽量写成报道性，内容包括研究目的、方法和结论等。应具有独立性和自明性、并采用第三人称表述，一般以300字内为宜。（6）关键词（含中英文）。是反映文章主题内容的名词和术语，应尽量从汉语主题词表中选取，第一关键词应能体现出文章的学科分类，每篇文章给出3-8个关键词，写在摘要下方。

报考中国社会科学院研究生院获得证书是被国家认可的，值得报考！更多信息可以百度启文在职研究生进行了解。