1. Haitian Yang, Jun Yan, Xingsi Li. Solving Inverse Viscoelasticity Problems Via An Aggregate Function Approach. International Journal of Solids and Structures, 2003,40(14):. Jun Yan, Gengdong Cheng, Liu Ling, Shutian Liu. Comparison of prediction on effective elastic property and shape optimization of truss material with periodic microstructure. International Journal of Mechanical Science, 2006, 48, . Ling Liu, Jun Yan, Gengdong Cheng. Optimum structure with homogeneous optimum truss-like material. Computers and Structures, 2008, 86, . Jun Yan, Ling Liu, Gengdong Cheng, Shutian Liu. Concurrent material and structural optimization of hollow plate with truss-like material. Structural and multidisciplinary optimization, 2008, 35, . Jun Yan, Gengdong Cheng, Ling Liu. A Uniform Optimum Material Based Model for Concurrent Optimization of Thermoelastic Structures and Materials. International Journal for Simulation and Multidisciplinary Design Optimization,2008, 2:. Bin Niu, Jun Yan, Gengdong Cheng. Optimum structure with homogeneous optimum cellular material for maximum fundamental frequency. Structural and multidisciplinary optimization, 2009, 39, 115-132.(通讯作者)7. Bin Wang, Jun Yan, Gengdong Cheng. Optimal structure design with low thermal directional expansion and high stiffness. Engineering Optimization, 2011, 43(6):581-595. (通讯作者)8. Xiaofeng Liu, Gengdong Cheng, Jun Yan, Lei Jiang. Singular optimum topology ofskeletal structures with frequency constraints by AGGA. Structural and Multidisciplinary Optimization.(On line: DOI: ) 9. 阎军,杨海天,李兴斯。凝聚函数法求解稳态热传导系数反问题研究。大连理工大学学报,2002,42(7):407-412。10. 杨海天,阎军。凝聚函数法求解粘弹性本构参数及温度场联合辨识问题。工程力学,2003,20(2):100-106。11. 阎军、程耿东、刘书田。周期性点阵类桁架材料等效弹性性能预测及尺度效应。固体力学学报,2005,26(3):421-428。12. 阎军、程耿东、刘岭、刘书田。点阵材料微极连续介质模型的应力优化设计。力学学报,2006,38(3):356-363。13. 刘岭、阎军、程耿东。随机材料等效模量预测及其尺度效应。固体力学学报,2007,28(3):275-280。14. 刘岭、阎军、程耿东。二维类桁架材料结构弹塑性分析。力学学报,2007,39(1):54-62。15. 刘岭、阎军、程耿东。考虑均一微结构的结构/材料两级协同优化。计算力学学报,2008,25(1):29-34。16. 牛斌,阎军,程耿东。周期性蜂窝材料微极等效模型及其微观应力的一种快速算法。固体力学学报,2008,29(2):109-120。(通讯作者)17. 阎军、程耿东、刘岭。基于均匀材料微结构模型的热弹性结构与材料协同优化。计算力学学报,2009,26(1):1-7。18. 牛斌,阎军,程耿东。 三维类桁架材料结构弹塑性分析。大连理工大学学报,2009,49(1):1-7。(通讯作者)19. 任懿,杨海天,牛斌,阎军。基于均匀化方法的土工格栅等效本构关系研究。大连理工大学学报,2009,49(3):317-321。20. 阎军,刘岭,刘晓峰,邓佳东。考虑尺寸效应的模块化结构两层级优化设计。力学学报,2010,42(2):268-274。21. 王 斌、阎军、程耿东。特定方向“零膨胀”的最小柔顺性结构优化设计。计算力学学报,2010,27(4):577-582。(通讯作者)22. 阎军、邓佳东、程耿东. 基于柔顺性与热变形双目标的多孔材料与结构几何多尺度优化设计。固体力学学报,2011,32(2):119-132。23. 刘晓峰,阎军,程耿东。采用自动分组遗传算法的频率约束下桁架拓扑优化。计算力学学报,2011,28(1):1-7。24. 阎军、孙兴盛、王乜、王舒、毛火华、刘书田。半导体照明灯具典型散热结构分析与优化。固体力学学报计算力学专刊,2010,31:285-293。25. 倪长辉、阎军、程耿东、郭旭。精确频率约束下框架结构的尺寸优化。固体力学学报计算力学专刊,2010,31:223-231。(通讯作者)26. 卢青针,肖能,阎军。钢管脐带缆弯曲刚度有限元分析。计算机辅助工程,2011,20(2):16-19.