发布时间：
[1] Retting, R. A., Williams, A. F., Preusser, D. F., et al. Classifying urban crashes for countermeasure development[J]. Accid Anal Prev, 1995, 27(3): 283-294.[2] Lan, L., Wang, ., Kuo, A. Development and Deployment of Public Transport Policy and Planning in Taiwan[J]. Transportation, 2006, 33(2): 153-170.[3] Sciortino, S., Vassar, M., Radetsky, M., et al. San Francisco pedestrian injury surveillance: mapping, under-reporting, and injury severity in police and hospital records[J]. Accid Anal Prev, 2005, 37(6): 1102-1113.查到3篇不错的文献。如果需要全文可以发邮件到，注明在百度提问的题目。另本人利用业余时间在百度知道里免费给网友查专业文献，纯属业余爱好，发的文献无存稿，请无关人员勿骚扰。
Research on the construction safety management of Civil EngineeringIn recent years, the construction accident in civil engineering in our country often occur. This not only caused casualties, also caused great loss of national property, and resulting in a very bad social influence. Therefore, in our country, the construction units in the civil engineering construction projects, shouldstrengthen the construction safety management, all aspects ofsecurity control for engineering, to prevent dangerous accidentsin the end it all. The cause of the civil engineering constructionaccidents are in many aspects. In order to enhance security,should be combined with the characteristics of construction projects and the enterprise's internal and external conditions, the rational allocation of production factors, optimization of management process. In order to realize the construction safetymanagement, construction units should establish a safety management system of a project, it should be carried out from the following aspects:A construction safety consciousness, cultivate the modern safety science theory, occurrence of unsafe human behavior causedcasualties. To implement safety management, it should becombined with psychology, behavioral science to strengthen the education and training of employees in production safety,improve the consciousness of safe production, so as to guide the safety production behavior of employees. For the construction enterprises should strengthen safety awareness and educationproject personnel, developing the regular safety education to the construction personnel involved in the project, and to carry outsecurity work. Three level education to the new participate in the work of the operating personnel; often transform types of employees, should be safety training for new types of work, makeoperation personnel matters needing attention can be familiar with the safe operation of the. In order to make safe productionconsciousness win support among the people, enterprisemanagement personnel but also in engineering project, using a variety of promotional tools to start a variety of education,cultivate the construction personnel safety consciousness. Andin the management of enterprises, the production safety systemthought to. Leaders at all levels and enterprises in issuing the project production task, should also carry out safety productionmeasures. Such as the production safety requirements to the construction personnel, so conducive to safe thought into the production of management, let each employee has consciously in the psychological sense of , the establishment of management system for safety in production in addition to strengthen production safety education and awareness of construction project staff, should alsoestablish a safety management system, protect the system from the construction enterprise safety in production of. In order toavoid the frequent occurrence of sudden accident, the construction enterprise should according to the project, to develop a comprehensive, the system of safety management,and invest the necessary manpower and funds to ensure the implementation of the project. Ensure the production safetyconstruction from the system implementation, the project section of construction enterprises should establish the safety inspectionsystem, and regularly to the project construction of the security check. Make a clear record of project construction process,record the dangerous post, and regularly check the work. Self evaluation and construction team every week to organize asafety activities, the project department to make regular safetyevaluation for project production. Construction enterprises in theconstruction of civil engineering, in order to establish a safety management system, need to make corresponding technical measures for safety management system, a comprehensivescientific standard for , the safety work of construction enterprise project technical measures should be prior to commencement of for engineering and technical measures should be strict examination and approval, the approval before implementation. If the design changes during construction, corresponding safety technical measures should be coordinated with the adjustment,will follow. The safety technical measures enacted personnel andparticipation, should fully understand the project as the construction scheme, construction environment, the actualoperation has, and combined with relevant laws and regulations or the security policy to establish safety technical measures,which can ensure the safety measures. In civil engineering construction of large, corresponding safety technical measuresshould be formulated more comprehensive and more specific,must be carried out through the whole process of construction,and mainly covers to other engineering safety. To establish the system of safety management, construction enterprises should also be strict safety before the construction of the project, technical personnel should to the technical measures for the construction personnelwork. Such as technical personnel issue written materials relatedto the construction personnel, and the implementation of safety technical measures of construction workers to regularly check;when technicians found construction personnel in violation oftechnical measure behavior, to give timely corrected. When theconstruction personnel technical mistakes when amended and supplemented immediately. In order to ensure the safety ofconstruction enterprises to implement, should take theseinspection of production safety measures the formation of rules and regulations, require employees to strictly abide by, so to ensure safety production system. At the same time, the construction enterprises can also follow the specific constructiondevelopment situation, formulate a set of safety technical measures linked to reward and punishment system, to strictly abide by the department or individual production safety, strictsecurity checks to reward, and if there are penalties for violations of the phenomenon. At the same time should have a goodproduction safety supervision work, and sent to the specialized production safety supervision work. When there is potential safety hazard factors in project development, should be timely analysis and inspection and make treatment immediately, so thatthe safety management to implement, implement the specificsystem, ensure the feasibility of production safety. The range ofcivil engineering projects involved in the construction processmore widely, because the factors which affect the engineering safety more. But in the construction process, the occurrence of safety accidents is often unexpected, with occasional andunexpected strong. These come unexpectedly accidents, serious damage often caused casualties and , strengthen the safety production and environment management in civil engineering construction process,environment is an important factor influencing the construction safety. So in order to guarantee safety in production, enterprises should be to strengthen the management of construction site. As in the construction site, the unnecessary equipment and surplus materials, should be timely treatment. In the pile construction materials in order to keep the construction site, the patency of the road accident, ensure to timely rescue, this is to protect the safety measures to realize. And construction enterprises shouldstrictly abide by the rules and regulations, which occurred on theconstruction site of the waste, garbage bag, cement, waste materials and other items should be clear, it can keep the siteclean, to create a civilized construction environment for safe construction. Create a safe production environment construction enterprises, should also be reflected in the risk disposal of equipment. For some such as the construction of electricity,dangerous equipment, cloth rod is used, should by the competent department of enterprise safety approval approval,the approval before they can be put into use after. And in the process of construction of civil engineering, a comprehensive analysis of the conditions of construction project. Some of the effects of environmental factors of the quality of construction, totake timely measures, and to conduct a comprehensivespecification, so that can realize the safe construction quality engineering to create good conditions.
你用economics到Google里去搜索看看，好多这方面的论文呢。
童鞋你好！这个估计需要自己搜索了！网上基本很难找到免费给你服务的！我在这里给你点搜索国际上常用的外文数据库：----------------------------------------------------------❶ISI web of knowledge Engineering Village2❷Elsevier SDOL数据库 IEEE/IEE(IEL)❸EBSCOhost RSC英国皇家化学学会❹ACM美国计算机学会 ASCE美国土木工程师学会❺Springer电子期刊 WorldSciNet电子期刊全文库❻Nature周刊 NetLibrary电子图书❼ProQuest学位论文全文数据库❽国道外文专题数据库 CALIS西文期刊目次数据库❾推荐使用ISI web of knowledge Engineering Village2-----------------------------------------------------------中文翻译得自己做了，实在不成就谷歌翻译。弄完之后，自己阅读几遍弄顺了就成啦！学校以及老师都不会看这个东西的！外文翻译不是论文的主要内容！所以，很容易过去的！祝你好运！
As things become increasingly frequent cultural exchanges and integration, as well as modern science and technology, culture, art, posters for the new concepts, posters increasingly focusing on the unique style of the rich character development and the design idea. Underwear modern poster design in the information ever want the market environment improving product visibility, do not forget to allow consumers to view, we must rely on "creativity." "Creative" advertising to target advertising for the creation of an unprecedented, fully reflect and meet certain people's emotional or substance of creative thinking. Through imagination, composition and creation process, will be targeting the potential for real property into the public can feel the concrete images. This paper first female to female consumer market and consumer psychology, conducted an investigation and analysis. Underwear bills creative inseparable from the market, the market is the source of creative inspiration. Only after sufficient market accumulation, there can be more collisions of thinking, creativity only have greater opportunities. Female underwear specific consumer products. posters in the design process must be fully aware of the group's structure and needs, the idea is to identify their characteristics, demand. Then according to the target consumer psychology to the point of seeking to design to meet the emotional needs of consumers. The article then focused on the analysis of contemporary underwear poster design status, creativity and cultural connotations. Now, China's underwear poster graphics performance of a single comparison, the majority of people-centered, but there are also unique. The bills reflect personality emerged. Unique underwear poster design must be based on the "new combination of old elements" of the creative principle, classical and modern combination do both compatible, "You are part of me, I have you." "Minimalism" graphics performance requirements, through such means for Reconstruction creation, to a strong visual impact results. Customized to the psychological feelings aroused their concern and sympathy, so as to achieve transfer product information, successful product marketing purposes. And the positioning of bills creative premise that only underwear bills positioning confirmed, to determine the content of the advertisements and advertising style. Advertising posters will be in the position to demonstrate the concept, given its deep cultural connotations, let the audience through advertising posters. understand where the author national and regional traditions, and understanding of traditional Chinese contain a modern design philosophy, truly "the only nation that is the world." Finally the article on graduation poster design process were discussed. From the point of design, design style, the tone design, the design performance practices, the way into the design and the design of the advertisement to conduct a detailed analysis, allowing readers to the author's creative concept of a deeper level of understanding and awareness.
毕业论文的英文翻译是thesis，音标是英[ˈθi:sɪs] 美[ˈθisɪs] 。thesisn.论文，毕业论文;论点，论题;命题扩展例句1、There is no empirical evidence to support his thesis. 他的论文缺乏实验证据的支持。2、How well does this thesis stand up to close examination? 这个命题经得起推敲吗？3、He has finished his thesis. 他的论文完成了。4、She's finished writing her thesis. 她那篇论文写出来了。5、Please write an abstract of this article 〔 thesis 〕. 请写一份这本书〔这篇论文〕的摘要。The article has a clear-cut thesis and arguments, but lacks reasoning.文章论点、论据鲜明，但缺乏论证。
[Abstract] [words ... ... Will the summary and key words were written in English which ~~~ Thank you master Dual help translate, as follows : [Abstract : With the widespread use of computers. The rapid development of information and network technology to make our lives a startling change. However, in the full enjoyment of a wide range of convenience brought about by the information age, faster services, but it makes the personal information collection and use of data more easily and quickly. The face of the recent surge in the number of all types of networks through invasion of privacy case, the definition of Internet privacy. ways to more effectively protect the privacy of cyberspace, the law has become a hot topic. This extension of the traditional right to privacy and added that an effective legal mechanism to further improve the protection of privacy. will be a useful way. Key words : the right to privacy; Internet privacy; Infringement; Protection; Legislation;
ThesisForGraduation毕业论文ThesisForAcademicDegree学位论文Thesis表示比较严肃的文章，是带有一定目的的，研究性的文章。学位论文，研究报告。
外文翻译要求：（1）选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。（2）选择外文翻译时一定选择外国作者写的文章，可从学校中知网或者外文数据库下载。（3）外文翻译字数要求3000字以上，从外文文章起始处开始翻译，不允许从文章中间部分开始翻译，翻译必须结束于文章的一个大段落。
这个不用全部翻译的，只要选择自己需要的内容翻译。
翻译的外文文献可以是一篇，也可以是两篇，但英文字符要求不少于2万。选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。
翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文(设计)主题相关，并在中文译文首页用“脚注”形式注明原文作者及出处，外文原文后应附中文译文。
扩展资料：
外文翻译需要注意的问题
1、外文文献的出处不要翻译成中文，且写在中文译文的右上角（不是放在页眉处）；会议要求：名称、地点、年份、卷（期），等 。
2、作者姓名以及作者的工作单位也不用必须翻译。
3、abstract翻译成“摘要”，不要翻译成“文章摘要”等其他词语。
4、Key words翻译成“关键词” 。
5、introduction 翻译成“引言”(不是导言)。
6、注意排版格式，都是单排版，行距，字号小4号，等（按照格式要求）。
7、各节的标号I、II等可以直接使用，不要再翻译成“第一部分”“第二部分”，等。
8、里面的图可以拷贝粘贴，但要将图标、横纵指标的英文标注翻译成中文。
9、里面的公式、表不可以拷贝粘贴，要自己重新录入、重新画表格。
参考资料：百度百科-毕业论文
同样也是摘要【abstract】和关键词【key words】另外一定要注解清楚 什么地方用到了引用的话【quotation】以及明确的出处
论文外文翻译的格式：要求英文语言较为地道、通顺、简练、语法正确、符合英语的表达习惯，专业术语规范、准确。外文页所有字体均为Times New Roman，字号为小四，摘要abstract和关键词key words要加黑，要在英文状态输入法下输入，注意标点符号是英文的。
物流管理的定义 物流管理（Logistics Management）是指在社会再生产过程中，根据物质资料实体流动的规律，应用管理的基本原理和科学方法，对物流活动进行计划、组织、指挥、协调、控制和监督，使各项物流活动实现最佳的协调与配合，以降低物流成本，提高物流效率和经济效益。现代物流管理是建立在系统论、信息论和控制论的基础上的。 物流管理主要有4个特点 （1）以实现客户满意为第一目标； （2）以企业整体最优为目的； （3）以信息为中心； （4）重效率更重效果。 实施物流管理的目的 实施物流管理的目的就是要在尽可能最低的总成本条件下实现既定的客户服务水平，即寻求服务优势和成本优势的一种动态平衡，并由此创造企业在竞争中的战略优势。根据这个目标，物流管理要解决的基本问题，简单地说，就是把合适的产品以合适的数量和合适的价格在合适的时间和合适的地点提供给客户。 物流管理强调运用系统方法解决问题。现代物流通常被认为是由运输、存储、包装、装卸、流通加工、配送和信息诸环节构成。各环节原本都有各自的功能、利益和观念。系统方法就是利用现代管理方法和现代技术，使各个环节共享总体信息，把所有环节作为一个一体化的系统来进行组织和管理，以使系统能够在尽可能低的总成本条件下，提供有竞争优势的客户服务。系统方法认为，系统的效益并不是它们各个局部环节效益的简单相加。系统方法意味着，对于出现的某一个方面的问题，要对全部的影响因素进行分析和评价。从这一思想出发，物流系统并不简单地追求在各个环节上各自的最低成本，因为物流各环节的效益之间存在相互影响、相互制约的倾向，存在着交替易损的关系。比如过分强调包装材料的节约，就可能因其易于破损造成运输和装卸费用的上升。因此，系统方法强调要进行总成本分析，以及避免次佳效应和成本权衡应用的分析，以达到总成本最低，同时满足既定的客户服务水平的目的。 物流管理的发展经历 物流管理的发展经历了配送管理、物流管理和供应链管理3个层次。物流管理起源于第二次世界大战中军队输送物资装备所发展出来的储运模式和技术。在战后这些技术被广泛应用于工业界，并极大地提高了企业的运作效率，为企业赢得更多客户。当时的物流管理主要针对企业的配送部分，即在成品生产出来后，如何快速而高效地经过配送中心把产品送达客户，并尽可能维持最低的库存量。美国物流管理协会那时叫做实物配送管理协会，而加拿大供应链与物流管理协会则叫做加拿大实物配送管理协会。在这个初级阶段，物流管理只是在既定数量的成品生产出来后，被动地去迎合客户需求，将产品运到客户指定的地点，并在运输的领域内去实现资源最优化使用，合理设置各配送中心的库存量。准确地说，这个阶段物流管理并未真正出现，有的只是运输管理、仓储管理和库存管理。物流经理的职位当时也不存在，有的只是运输经理或仓库经理。 现代意义上的物流管理出现在20世纪80年代。人们发现利用跨职能的流程管理的方式去观察、分析和解决企业经营中的问题非常有效。通过分析物料从原材料运到工厂，流经生产线上每个工作站，产出成品，再运送到配送中心，最后交付给客户的整个流通过程，企业可以消除很多看似高效率却实际上降低了整体效率的局部优化行为。因为每个职能部门都想尽可能地利用其产能，没有留下任何富余，一旦需求增加，则处处成为瓶颈，导致整个流程的中断。又比如运输部作为一个独立的职能部门，总是想方设法降低其运输成本，但若其因此而将一笔必须加快的订单交付海运而不是空运，这虽然省下了运费，却失去了客户，导致整体的失利。所以传统的垂直职能管理已不适应现代大规模工业化生产，而横向的物流管理却可以综合管理每一个流程上的不同职能，以取得整体最优化的协同作用。 在这个阶段，物流管理的范围扩展到除运输外的需求预测、采购、生产计划、存货管理、配送与客户服务等，以系统化管理企业的运作，达到整体效益的最大化。高德拉特所著的《目标》一书风靡全球制造业界，其精髓就是从生产流程的角度来管理生产。相应地，美国实物配送管理协会在20世纪80年代中期改名为美国物流管理协会，而加拿大实物配送管理协会则在1992年改名为加拿大物流管理协会。 一个典型的制造企业，其需求预测、原材料采购和运输环节通常叫做进向物流，原材料在工厂内部工序间的流通环节叫做生产物流，而配送与客户服务环节叫做出向物流。物流管理的关键则是系统管理从原材料、在制品到成品的整个流程，以保证在最低的存货条件下，物料畅通的买进、运入、加工、运出并交付到客户手中。对于有着高效物流管理的企业的股东而言，这意味着以最少的资本做出最大的生意，产生最大的投资回报。 国网提示：如果认为我们提供的本词条还有不当的地方欢迎批评指正。【物流的概念】 解释一： 物流是指为了满足客户的需要，以最低的成本，通过运输、保管、配送等方式，实现原材料、半成品、成品及相关信息由商品的产地到商品的消费地所进行的计划、实施和管理的全过程。 物流构成：商品的运输、配送、仓储、包装、搬运装卸、流通加工，以及相关的物流信息等环节。 物流活动的具体内容包括以下几个方面：用户服务、需求预测、定单处理、配送、存货控制、运输、仓库管理、工厂和仓库的布局与选址、搬运装卸、采购、包装、情报信息。 解释二： 在我国国家标准《物流术语》的定义中指出：物流是“物品从供应地到接收地的实体流动过程，根据实际需要，将运输、储存、装卸、搬运、包装、流通加工、配送、信息处理等基本功能实施有机结合。” 解释三： 物流中的“物”是物质资料世界中同时具备物质实体特点和可以进行物理性位移的那一部分物质资料。“流”是物理性运动，这种运动有其限定的含义，就是以地球为参照系，相对于地球而发生的物理性运动，称之为"位移"。流的范围可以是地理性的大范围，也可以是在同一地域、同一环境中的微观运动，小范围位移。“物”和“流”的组合，是一种建立在自然运动基础上的高级的运动形式。其互相联系是在经济目的和实物之间，在军事目的和实物之间，甚至在某种社会目的和实物之间，寻找运动的规律。因此，物流不仅是上述限定条件下的“物”和“流”的组合，而更重要在于，是限定于军事、经济、社会条件下的组合，是从军事、经济、社会角度来观察物的运输，达到某种军事、经济、社会的要求。 解释四： stream ：在化工生产过程中，需要进行化学或物理变化的物料常常以气态或液态参与生产过程，并以管道输送，这样参与过程的原料、中间产物、产品等称为物流。在连续操作过程中不断地加入或排出的固体物料也可称为物流。 The definition of logistics management Logistics Management (Logistics Management) is in the process of social reproduction, according to the material flow of information entities, the application of the basic principles of management and the scientific method, the logistics activities of planning, organization, command, coordination, control and supervision, so that all Logistics activities to achieve the best possible coordination and cooperation in order to reduce logistics costs and enhance logistics efficiency and economic benefits. Modern logistics management system is built on the theory, information theory, cybernetics and on the basis of. Logistics Management has four major characteristics of (1) in order to achieve customer satisfaction as the first target; (2) to enterprises as a whole for the purpose of optimal; (3) with information as the center; (4) more emphasis on efficient results. The purpose of the implementation of logistics management The purpose of the implementation of logistics management is to the lowest possible total cost of conditions to achieve the established level of customer service, or service advantages and seek cost advantages of a dynamic equilibrium, and thus create competitive enterprises in the strategic advantage. According to this goal, logistics management to solve the basic problem, simply put, is to the right products to fit the number and the right price at the right time and suitable sites available to customers. Logistics management systems that use methods to solve the problem. Modern Logistics normally be considered by the transport, storage, packaging, handling, processing in circulation, distribution and information constitute part of all. All have their own part of the original functions, interests and concepts. System approach is the use of modern management methods and modern technology so that all aspects of information sharing in general, all the links as an integrated system for organization and management, so that the system can be as low as possible under the conditions of the total cost, provided there Competitive advantage of customer service. Systems approach that the system is not the effectiveness of their various local links-effective simple sum. System means that, there's a certain aspect of the problem and want to all of the factors affecting the analysis and evaluation. Starting from this idea, the logistics system is not simply the pursuit of their own in various areas of the lowest cost, because the logistics of the link between the benefits of mutual influence, the tendency of mutual constraints, there is the turn of the relationship between vulnerability. For example, too much emphasis on packaging materials savings, it could cause damage because of their easy to transport and handling costs increased. Therefore, the systems approach stresses the need to carry out the total cost analysis, and to avoid the second best effect and weigh the cost of the analysis, so as to achieve the lowest cost, while meeting the established level of customer service purposes. The development of logistics management experience The development of logistics management has experienced distribution management, logistics management and supply chain management three levels. Logistics management originated in World War II military transport supplies and equipment developed by the storage and transportation modes and technologies. After the war, these technologies are widely used in industry, and greatly improve the operational efficiency of enterprises, for enterprises to win more customers. At that time, logistics management, aimed at the distribution of the finished product that is produced, how fast and efficient products through distribution centers to serve customers, and as far as possible to maintain a minimum inventory. Logistics Management Association of the United States at that time called the Physical Distribution Management Association and the Canadian supply chain and logistics management is called the Canadian Association of Physical Distribution Management Association. In this initial stage, logistics management is the established number of products produced by, passively to meet the needs of customers, products will be transported to the designated locations, and in the field of transport to achieve the most optimal use of resources, a reasonable set of distribution Center inventory. Rather, this stage of logistics management has not really there, there are only transportation management, warehousing management and inventory management. Logistics manager positions do not exist at that time, there are only the manager or warehouse manager. Modern sense of logistics management in the 1980s. People find that the use of cross-functional process management approach to observe, analyze and solve business problems in the very effective. By analyzing the material from raw materials shipped to factories and production lines running through each workstation, product output, and then transported to distribution centers, the final delivery to customers throughout the circulation process, enterprises can eliminate a lot of high-efficiency appears to have actually reduced Optimize the overall efficiency of the local acts. Because everyone wants to functional departments as far as possible use of its capacity, left no surplus, once the increased demand, everywhere a bottleneck, resulting in the suspension of the entire process. For instance the Ministry of Transport as a separate functional departments, always trying to reduce their transport costs, but its result will be a need to speed up the delivery of orders rather than shipping by air, although this saved the freight, it lost customers, resulting in The overall loss. Therefore, the traditional vertical management functions no longer suited to modern large-scale industrial production, and horizontal logistics management can be integrated management of each process on the different functions, in order to get the overall optimization of synergies. At this stage, to expand the scope of logistics management in addition to transport, the demand forecasts, procurement, production planning, inventory management, distribution and customer service, so as to systematic management of the operation of enterprises, to maximize the overall efficiency. Goldratt's The "goal" in a sweep of the global manufacturing industry, its essence is from the perspective of the production process to manage the production. Accordingly, the Physical Distribution Management Association of the United States in the mid-1980s changed its name to the United States Logistics Management Association, Canada and the Physical Distribution Management Association in 1992 changed its name to the Canadian Association of Logistics Management. A typical manufacturing enterprise, its demand forecasts, purchase of raw materials and transport links are usually called into the logistics and raw materials in the factory processes within the logistics supply chain called the production, distribution and customer service link called out to the logistics. Logistics management is the key systems management from raw materials, finished products to the entire process to ensure that the lowest inventory conditions, the flow of buying materials, imported, processed, shipped out and delivered to the customer. For a highly efficient logistics management companies shareholders, this means that the capital to at least make the most of the business, produce the greatest return on investment. State Net: If we think of this term is also available in inappropriate places welcome criticism correction. [] The concept of logistics One explanation: Logistics is that in order to meet customer needs, the lowest cost, through the transport, storage, distribution, etc., and raw materials, semi-finished products, finished goods and related information from the origin to the consumption of goods and conducted by the planning, implementation and management of the The entire process. Logistics form: the transport of goods, distribution, warehousing, packing, loading and unloading handling, circulation processing, logistics and related information, and other areas. The specific content of logistics activities, including the following areas: customer service and demand forecasts, order processing, distribution, inventory control, transport, storage management, factories and warehouses and the layout of the site, removal handling, procurement, packaging, intelligence and information. Explanation 2: China's national standards, "the logistics of terms" that the definition of: logistics is "items from the suppliers to receive and process flow of the entity, according to actual needs, transportation, storage, handling, transport, packaging and distribution processing, distribution, information processing , And other basic functions of the organic integration. " Three explanations: The logistics of the "objects" is material information in the world along with material entities can be physical characteristics and the displacement of that part of material information. "Flow" is the physical movement, such movement has its limited meaning, that is, for the reference to the Earth in relation to the earth and the physical movement, known as "displacement." The scope of flow can be rational and large-scale, may also be in the same area, the micro-environment of the same movement, small-scale displacement. "Objects" and "flow" of the combination is a natural movement built on the basis of the senior forms of exercise. Their mutual ties in the economic objective and in-kind between the military and in-kind, and even in certain social objectives and in-kind between the movement to find the laws. Therefore, logistics is not only the qualification of "objects" and "flow" of the portfolio, but more important is that is limited to the military, economic and social conditions under the portfolio, is from the military, economic and social point of view of observation Transport, to achieve some kind of military, economic, social requirements. 4 explained: stream: in the chemical production process, the need for chemical or physical changes of materials, often in gaseous or liquid involved in the production process, and piped, to participate in this process of raw materials, intermediate products, products known as logistics. In continuous operation in the process of constantly adding or from the solid material can also known as logistics.
E-business environment under the logistics and distributionAbstract: e-commerce under the logistics and distribution will help reduce production business inventories and accelerate capital turnover, enhance logistics efficiency and reduce logistics costs, and stimulate the social needs and is conducive to the whole community's macro-control and promote the healthy operation of the market economy and electronic Business to develop in depth. Key words: e-commerce distributionFirst, China's development of logistics distribution E-commerce logistics entity is the core issue of the distribution items. China, as a developing country, the logistics industry to its late start, low level, the introduction of e-commerce, e-commerce did not have to support the activities of the modern logistics level. However, since e-commerce in China to settle down, people did not stop distribution of the discussion. At present, China mainly three types of e-commerce distribution model, is a full distribution system, that is, the domestic Internet-based, to various regions of the country's logistics system has been linked by agreement, a comprehensive distribution network for the entire process straight . The second category is a regional system of a single business model. Partial to the original business of a single regional distribution site for the base and be integrated, similar to a single business to business services, computer networking, the entire system of networking, and automated management. The third category is professional distribution system of the model. Such as postal communications, railway transport, air, water, Qiyun and other departments have been the perfect use of the national transport network resources to carry out specialized distribution. From across the country, China has long been subject to the impact of the planned economy, low levels of social logistics, logistics management system confusion, the existing three categories of e-commerce distribution model is not yet ripe, efficiency is not high, but in the red. Therefore, the need for China's economic development, enterprise reform and development of e-commerce logistics and distribution, learn from developed countries through the road and experience from China in 1992 began a logistics distribution center of the experimental work. In 1996 the Internal Trade issued "on strengthening the commercial development of logistics distribution center construction work of the notice," pointed out the development and construction of logistics distribution center the importance of the proposed development and construction of the guiding ideology and principle, put forward the "mechanisms and intensive Management, improve the function of the development of the logistics and enhance strength "of the reform and development principles, to establish modern logistics distribution center to change the social construction of logistics distribution centers, the development of modern network as the main direction. Second, China's logistics and distribution patterns and problems of At present, China's increased the number of e-commerce sites, transactions involving goods of daily necessities and other non-consumables, and on its e-commerce distribution model, can be divided into three types, namely operating BtoB (business to business) business model, BtoC (Business to consumers) model and the virtual logistics company model, in practice, although these three models get the recognition and application of common, but in e-commerce and distribution of convergence and optimal operation, there are still many problems, reflected in concrete : China's current social low level of information networks, network infrastructure is relatively weak, especially as e-commerce platform for the delivery and billing infrastructure lags behind, the computer penetration rate low rate of Internet users only about 8 percent and are mainly concentrated in major cities , The use of Internet users in the real rate of online shopping less than percent, electronic shopping credit has not been widely recognized. The understanding of the importance of e-commerce logistics enough. Availability of the overall level of enterprise network low ratio of less than Internet companies, logistics enterprise information construction lagged behind, logistics and distribution of specialization, social, electronic, modern low level. There have been serious problems of poor business reputation, late delivery, delivery or do not send the wrong frequent phenomenon. E-commerce logistics infrastructure is not yet perfect, logistics systems theory is not enough, the logistics technology is still very backward, China's logistics workers and practice the theory of modern logistics of the new theories, new technologies, such as integrated supply chain management, third party logistics, automation Warehouse, automatic sorting system, global positioning system (GPS), and so has just contacted. Jidong of the lack of e-commerce and e-commerce technology has practical experience in human resources, in particular the lack of Jidong e-commerce and logistics distribution to understand the innovative spirit of the compound talents. Third, logistics and healthy development of the countermeasure 1. Enhance the degree of information. Distribution of information for performance: the logistics of the database of information collection and code, the logistics of the electronic information processing and computer, the transmission of information and the standardization of real-time logistics information such as the digital storage. Therefore, the bar-code technology, database technology, electronic ordering system, electronic data exchange, radio frequency technology, management information systems, enterprise resource planning, and other advanced management strategy should be in China's logistics and distribution enterprises to promote use. Information is all modern technology and management tools of the foundation, only to achieve distribution of information can take up to the era of e-commerce distribution industry and historic task. 2. Improve the logistics management system, improve service quality. Internet shopping for the delivery time is too long and has yet to supply the phenomenon as e-commerce company in order to better serve customers, suppliers and customers should be strengthened between the exchange of information and feedback. This will save users to order processing fees, users can also save time and gradually raise awareness of online shopping sense of trust, making good steady development of e-commerce. 3. Distribution lower prices. China's large-scale development of e-commerce online shopping has been difficult, logistics and distribution costs high, especially in the type of Internet transactions, for each client to achieve door-to-door is the high cost, we must work hard to reduce costs, e-commerce solution Logistics and distribution companies and distribution services among enterprises in the prices of contradictions. 4. Perfect laws and policies. E-commerce for the logistics and distribution problems, the relevant government departments should actively study the characteristics of e-commerce, the rapid development of targeted laws, regulations and policies to regulate e-commerce activities, enterprises and consumers in general to increase the confidence of e-commerce Flu. 5. Actively developing third-party logistics enterprises. "TPL" refers to the logistics business from the supply side and demand-side beyond the completion of a third party, in a sense that it is a form of logistics professionalism, "third-party logistics" in logistics management experience, Talent, technology, philosophy and other areas have certain advantages, the e-commerce transactions in both supply and demand of all the logistics activities of agent credentials, well-funded third-party logistics, the logistics can take full advantage of modern technology, is built on the foundation of modern information network technology On the logistics management software to ensure that customers at any time and any place check of goods and provision of supporting services, e-commerce transactions between the parties involved in the logistics can be entrusted to professional logistics enterprises, concentrate on developing the electronics market and business efficiency of the e-commerce BtoB transactions. The establishment of a national logistics public information platform, the development of 4PL. 4PL is a supply chain integrator, mobilization and management organizations and their complementarity of the service provider's resources, capacity and technology to provide an integrated supply chain solutions. Clearly, 4PL must meet three conditions: not the interests of the logistics side, to achieve information sharing, the ability to integrate all the logistics resources. And really meet these conditions, only a virtual network of platforms, and this is the logistics and public information platform. It provides comprehensive supply chain solutions to social integration of logistics resources, enhance the country's logistics industry integrated collaborative capabilities.电子商务环境下的物流配送摘要：电子商务下的物流配送既有利于减少生产企业库存，加速资金周转，提高物流效率，降低物流成本，又刺激了社会需求，有利于整个社会的宏观调控，促进市场经济的健康运行及电子商务向纵深发展。关键词：电子商务 物流 配送一、我国物流配送发展概况 电子商务物流的核心问题是实体物品的配送。我国作为一个发展中国家，物流业起步较晚，水平低，在引进电子商务时，并不具备能够支持电子商务活动的现代化物流水平。但自从电子商务在中国落户，人们就没有停止对物流配送问题的讨论。目前，我国主要有三类电子商务物流配送模式，一类是全程物流配送系统，即以国内互联网为基础，把全国各地区已有的物流系统通过协议联系起来，形成全方位的全程直投配送网。第二类是区域性单一业务系统改造模式。以原有局部区域性单一业务的配送站点为基础，并加以集成，把单一业务改为同类业务服务，通过计算机联网，实现整个系统的网络化、自动化管理。第三类是专业化配送系统改造模式。如邮政通讯、铁运、空运、水运、汽运等部门利用已有的完善的全国性运输网络资源进行专业化配送。从全国范围来看，我国长期以来受计划经济的影响，物流社会化程度低，物流管理体制混乱，已有的三类电子商务物流配送模式还不成熟，效率不高，而且处于亏损状态。因此，针对我国经济发展需要、企业改革及电子商务物流配送发展现状，借鉴发达国家走过的道路和经验，我国从1992年起开始了物流配送中心的试点工作。1996年原国内贸易部发出了《关于加强商业物流配送中心发展建设工作的通知》，指出了发展建设物流配送中心的重要意义，提出发展建设的指导思想和原则，同时提出了“转换机制、集约经营、完善功能、发展物流、增强实力”的改革与发展方针，确定以向现代化物流配送中心转变，建设社会化的物流配送中心，发展现代化网络为主要方向。 二、我国物流配送模式及存在的问题 目前我国电子商务网站数量大增，交易商品涉及日用品及其他非易耗品等，就其电子商务物流配送模式而言，可分为三种类型，分别是经营BtoB（商家对商家）业务的模式、BtoC（商家对消费者）的模式以及虚拟物流公司模式，在实践中这三种模式虽然得到共同的认同与应用，但在电子商务与物流配送的接轨和优化运行上还存在许多问题，具体体现在： 中国目前的社会信息网络化水平低，网络基础设施相对薄弱，特别是作为电子商务平台的传递和结算基础设施滞后，计算机普及率低，网民比率只有8%左右，并主要集中在各大中城市，网民中真正采用网上购物的比率不到，电子购物的信用没有得到广泛认同。 对电子商务物流的重要性认识不够。供货企业网络化整体水平低，上网企业比率不足，物流企业信息化建设滞后，物流配送的专业化、社会化、电子化、现代化程度低。 存在严重的商业信誉差的问题，迟送、送错或不送现象时有发生。 电子商务物流基础尚不完善，物流理论还不够系统，物流技术还很落后，我国物流理论工作者和实践者对现代物流的新理论、新技术，如集成化供应链管理、第三方物流、自动化立体仓库、全自动分拣系统、全球定位系统（GPS）等才刚刚接触。 缺乏既懂电子商务理论和技术又有电子商务实践经验人才，尤其缺乏既懂电子商务又懂物流配送的有创新精神的复合型人才。三、物流配送健康发展的对策 1.提高信息化程度。物流配送信息化表现为：物流信息收集的数据库化和代码化、物流信息处理的电子化和计算机化、信息传递的标准化和实时化、物流信息存储的数字化等。因此,条码技术、数据库技术、电子订货系统、电子数据交换、射频技术、管理信息系统、企业资源计划等先进的管理策略，应在我国的物流配送企业大力推广运用。信息化是一切现代技术和管理手段的基础，只有实现物流配送信息化,才能承担起电子商务时代赋予物流配送业的历史任务。 2.完善物流管理系统功能,提高售后服务质量。针对网上购物出现的送货时间过长以及迟迟没有货源的现象，作为电子商务公司为了能更好的服务于顾客，应加强顾客和供货商之间信息的交流与反馈。这样可以给用户节约订单处理费用，又可以节约用户的时间，逐渐提高人们对网上购物的信任感，使得电子商务良性稳步发展。 3.降低配送服务价格。我国发展电子商务实现大规模的网上购物一直困难重重，物流配送费用偏高，特别是零售型的网上交易，为每个客户实现送货上门是高成本的，必须努力降低成本，解决电子商务公司与物流配送企业之间在配送服务价格方面的矛盾。 4.完善法律政策。针对电子商务物流配送出现的种种问题，政府有关部门应该积极研究电子商务的特点，迅速制定有针对性地法律、法规和政策，以规范电子商务活动，增加企业和广大消费者对电子商务的信任感。 5.积极发展第三方物流企业。“第三方物流”是指物流由商务的供方、需方之外的第三方完成,从某种意义上说它是物流专业化的一种形式，“第三方物流”一般在物流管理经验、人才、技术、理念等方面都具有一定的优势,对电子商务交易中供求双方的所有物流活动进行全权代理，同时第三方物流资金雄厚,可以充分利用现代物流技术,具有建立在现代信息网络技术基础上的物流管理软件,保证客户在任何时间、任何地点查看货物及提供配套的服务，参与电子商务交易的双方可以把物流委托给专业物流企业,专心于电子市场的开拓和商务效率的提高电子商务BtoB交易模式。 建立全国物流公共信息平台，发展第四方物流。第四方物流是一个供应链集成商，它调集和管理组织自己的以及具有互补性的服务提供商的资源、能力和技术，以提供一个综合的供应链解决方案。显然，第四方物流必须满足三个条件：不是物流的利益方、能实现信息共享、有能力整合所有的物流资源。而真正满足这些条件的只有一种虚拟的物流网平台，这就是全国物流公共信息平台。它能提供综合的供应链解决方案，以整合社会物流资源，提高我国物流产业的综合协同能力。
物流这个范围太广了吧，我觉得你应该再把范围缩小一下……还有，你指的字数是英文字数还是中文字数呢，这个差距很大的……来自明译！
只能建议你到中国知网上看看，上面有更权威更全面的资料查阅！希望可以帮到你！
Citations Database
提供美国能源部的科技信息摘要。学科范围：材料科学、环境科学、计算机、能源和物理。文献类型包括期刊论文、学位论文、研究报告和专利。
12.网上免费全文期刊FullText
提供7000多种学术期刊的免费全文获取。
J-Gate 开放获取期刊门户
提供基于开放获取的近 4000 种期刊的免费检索和全文链接，包含学校、研究机构和行业期刊，其中超过 1500 种学术期刊经同行评议( Peer-Reviewed )
(PubMed Centeral)
美国NCBI(美国国家生物技术信息中心)建立的数字化生命科学期刊文献集，S现提供50余种生物医学期刊免费全文 。
(Directory of Open Access Journals)
免费的全文科技学术期刊。现有2752种期刊，其中830种可以全文搜索。目前有140307篇文章。
Press
斯坦福大学图书馆的分支机构——HighWire出版社，拥有最大的免费期刊数据库，可以在线提供916种免费期刊和1，149，216篇全文 。
of Tennessee, Knoxville
田纳西大学的经济学杂志，包括2000年至2002年三年共12期的免费期刊。
Electronic Library of Mathematics
欧洲数学会电子图书馆，提供了期刊、会议、论文集、专著、演讲、软件等资源。并提供期刊和电子版图书的全文浏览。非电子版图书提供前言、摘要、目录和书评等内容。特别地，在经典著作栏目内，目前可检索到哈密尔顿和黎曼的经典论文的全文。
美国“科学”网站收录内容以研究与开发报告为主，所有的信息均免费使用，也不必注册，但是通过这些站点链接的有些信息是限制使用或有条件使用的。
教育资源信息中心
美国教育部资助的网站系列和世界上最大的教育资源数据库，其中包括各种文档以及教育研究与实践方面的论文摘要，这些摘要超过了一百万篇，收录980多种教育及和教育相关的期刊文献的题录和文摘。部分资源可查找到全文
以上就是环球青藤小编关于外文文献翻译的几个查找领域的相关分享，希望对各位小伙伴们有所帮助，想要了解更多毕业论文相关内容，请关注本平台，小编会做及时的整理并发布的，大家注意查看哦!
标点符号问题或正文结果与图片结果不符合等笔误问题，这一种我们只需要在自己的文章中核实后进行改正即可；北京译顶科技做的不错，可以联系他们一下若是还有不明白可以统一去知道了解下
1,不论是文末的参考文献还是行文中引文的外文文献,一般均用原始文献的名称、作者及出处.亦可视情在括号中译出中文文献名. 2,如果是纸质文献,还需注明期刊期号（某年某期）或书籍原出版社及出版时间.如果是来自网络,当注明网址. 3,如果采用的是中译本的外文文献,则直接用中译本作为参考文献. 4,行文中引用外文文章,有两种办法,一是直接引用外文,（此办法多半用于比较专业的学术论文,读者均具有理解能力）或者在外文后用括号译成中文.另一种是直接译成中文,然后在译文后用括号给出原文,或者在注释中给出原文.视情而定. 5,如果是给专业刊物投稿,最好了解一下该刊物对于参考文献列表以及注释的有关规定,按要求做.
你现在在学校么？建议你到学校的图书馆去查（一般每个学校都会买网站使用权，这些特定的网站才有学术型的论文或者期刊的，一般我们自己网进不去这些网站），上中国知网，你将你论文题目输入，选择相似查找，和你论文题目一样或者相似的论文就会罗列出来了，然后你根据自己需要选择就可以。