机械类论文英文及翻译

用谷歌翻译的，悬赏能快些给我吗？算我祈求，我有急用！！谢谢，真的有急用，我现在都要哭了！！车削机床机床工具被广泛用于工业，以生产各类机械零件。有些是一般用途的机器，和其他人用来执行高度专业化的操作。使用最广泛的机床是普通车床，它提供了一个旋转轴的主要原则的议案，同时适当传授饲料动议的工具。的工件，必须牢牢掌握，经常在一个夹头。酒吧也可举行collets ，其中包含一个分裂套管推或拉对锥面。工件形状的尴尬往往是由螺栓的面板。 包含的启闭机制的驱动器，通常将改变齿轮和变速驱动器。长期工件支持他们最后提出了中心举行尾座。这个工具本身是一个工具举行后，允许设置工具的角度（横向和纵向） 。该工具后是安装在一个马车，而这反过来又获得支持的方式加工的床，确保刚性和免受震动。悬垂部分，停机坪的运输，可从事与饲料棒给予连续进给运动，或与丝杠切割的线程。很长工件的担保反对过度偏转的两个手指中心稳步休息休息或螺栓的车床床;后续其余贴近马车。 有时工具后坐在休息复合工具结合幻灯片，可以设置在任何角度，因此，圆锥表面可以通过手喂养工具。参观双向工具后可旋转约竖井，并允许快速变化的工具，在预设的立场，从而加快连续行动。示踪剂或重复车床的设计制造形状不规则零件自动。基本操作这一车床如下。模板的任何一个单位或三维形状是放置在一个时段。阿导或指针然后继续沿着这条形状和其运动控制的切削刀具。重复可能包括方形或锥形，肩膀，半径，沟槽，蜡烛，和轮廓，工作，如电机轴，主轴，价值茎，活塞，杆，汽车车轴，涡轮轴，以及各种其他的物体也可以打开使用这种类型的车床。转塔车床的生产车床是用来制造任何数量的相同件。 螺杆机类似的建设炮塔车床，但他们的头上旨在保持和饲料长期酒吧的股票。否则，没有什么区别。

IntroductionMachining aims to generate the shape of work-piece form a solid body,or to improve the tolerances and surface finish of a previously formed work-piece,by removing excess materials in the form of chips. Machining is capable of creating geometric configurations,tolerances, and surface finishes often unobtainable by any other technique.However, machining removes materials, which has already been paid for, in the form of relatively small particles that are more difficult to recycle and are in greater danger of becoming mixed. Therefore,developments often aim at reducing or-if at all possible-eliminating machining, especially in mass production.For these reasons, machining has lost some important markets, yet, at the same time, it has also been developing and especially having captured new markets with the application of numerical control.Some feel for the important of machining may be gained from the observation that in 1983 there were about 2 million metal-cutting machine tools in the unite states ( of which some 5% were numerically controlled ) and that labor and overhead costs amounted to $125 billion, or 3% of the GNP.

2.1. Seed quality evaluation 2.1.1. Mechanical damage Three replications of 100 seeds were soaked in 1% sodium hypochlorite solution for 10 min. The seeds with seed coat damage swelled visibly and were counted using a hand lens. The split (%) was obtained by passing 200 g of seed through a 4.00mm round hole sieve. The material that passed through the sieve was termed as ‘‘splits’’ and then weighed (Anonymous, 1985). 2.1 豆种质量评估2.1.1机械损伤经过3遍流程的100颗豆种在1%的漂白液中浸泡10分钟。种子以及种皮的很明显地膨胀损坏可以通过手持透镜观测到。 破裂指数通过200g的种子经4毫米圆洞筛网筛选得到。通过筛网的原料被称作“破裂”然后称重。2.1.2. Germination test Germination ability was determined according to the Association of Official Seed Analysts (Anonymous, 1981). Three replications of 100 seeds were placed in presoaked germination paper and were then placed in a seed germinator at 251C for 7 days. After 7 days, the percentage of seeds germinating normally was recorded. 2.1.2 发芽力检测发芽能力是按照官方的种子专家学会去定义的。经过3次流程的100颗豆种被放置在发芽试纸上预浸，人后在发芽力检测仪上以251C的温度放置7天。 7天之后， 发芽种子的比例被记录下来。2.1.3. Seed vigor The seed vigor tests were conducted according to the International Seed Testing Association (ISTA) method (Anonymous, 1985). Sheets of paper towel with 350 seeds were kept in a seed germinator at 251C for 7 days. After 7 days, the lengths of germinated seedlings were measured in centimeters. The vigor index was calculated as vigor index ¼ 1 NX germination ð%Þ seedling length ðcmÞ; where N is the number of seeds that germinated. 2.1.3 种子的活力种子活力的检测是按照国际种子检测协会的步骤操作的。350颗豆种放在纸巾上，在种子发芽力检测仪器内以251C的温度保存7天， 7天之后， 以厘米为单位去测量种芽的长度。活力指数是按照vigor index ¼ 1 NX germination ð%Þ seedling length ðcmÞ; where N is the number of seeds that germinated.（此处由于有乱码， 无法翻译）2.1.4. Accelerated aging This test was used to predict the storage potential of seed. It combines the stresses caused by high temperature and high humidity to which seed maybe exposed. It is expected that the seed lots which record a higher level of germination in the accelerated aging test can be stored for a longer period than others. Two replications of 50 seeds were kept in perforated plastic boxes. These boxes were kept at 401C and at 100% relative humidity(r :h:) for 96 h. The germination of these lots was recorded as outlined by the ISTA (Anonymous, 1985). 2.1.4加速老化这个检测是用作预告种子的储存潜力的。 它包括也许种子露天放置时，由高温度和高湿度造成的作用。人们预计在发芽力检测中有高记录的那批种子能够在加速老化测验中比其它的种子储存的更久。经过2次流程的50颗种子保存在穿孔的盒子当中。这些盒子被放置在401C温度及100%相对湿度中96个小时。这批的发芽力被ISTA作为要点记录下来。2.2. Determination of moisture content The standard oven method outlined by the ISTA (Anonymous, 1985) was employed. Three replications of 10 g seed were kept in a hot air oven at 1021C for 24 h. At the end of this period, the samples were transferred to a desiccator for cooling. The samples were then weighed and moisture content calculated on a dry mass basis. 2.2 含水量的定义ISTA大纲中的标准加热程序被引用到这里。经过3次流程的10g豆种被保存在干烤箱中以1021C的温度放置24小时。 在检测最后， 样品被转移到干燥器中冷却。然后样品称重，并计算含水量，按照折干计算。2.3. Evaluation of damage due to free-fall To determine the effect of height of fall on the seed quality, three replications of 100 seeds, drawn from each treatment, were dropped from a height of 0.5, 1.0, 1.5, or 2.0m on to a cement floor or a galvanized iron floor. The dropped seeds were tested for germination and vigor as before. 2.4. Statistical analysis of data The data collected during the experiments were analyzed using ANOVA (Anonymous, 1992) to study the effects of m:c:; process stages and heights of free-fall on the parameters of seed quality. The differences in means were examined using the Tukey test of significance.2.3 由自由下落造成损失的评估为了确定下落高度对种子质量造成的影响， 经过3遍流程的100颗种子， 分别从0.5， 1.0， 1.5， 2.0米处下落到水泥地或者镀锌铁板上，象以前一样，下落的种子被检测种子发芽力以及活力。2.4数据统计分析使用ANOVA分析了在实验当中所收集的数据，研究了含水量，加工平台以及自由下落的高度参数在种子质量方面的影响。检测方式的差异已被Tukey test of significance.验证。

2.1 。种子质量评价2.1.1 。机械损伤3次重复的100个种子浸泡在1 ％的次氯酸钠溶液为10分钟左右。 种子种皮损伤肿胀visiblyand计数用一只手的镜头。分裂（ ％ ） 获得绕过200克种子通过4.00毫米圆孔筛。材料通过筛被称为''分裂''然后权衡（无名氏， 1985年） 。 2.1.2 。发芽试验发芽abilitywas决心根据该协会的官方种子分析家（无名氏， 1981年） 。 3次重复的100种被安置在presoaked发芽纸然后被放置在一个种子萌发在251c为7天。后7天内，这个比率的种子发芽normallywas记录。 2.1.3 。种子活力种子活力，进行测试，按照国际种子检验协会（土改）方法（无名氏， 1985年） 。张纸毛巾3 50种子被保存在一个种子萌发在251c为7天。经过7天内的长度树苗发芽测定厘米。活力指数计算公式为活力指数¼一日nxgermination -％ þ幼苗长度ð cmþ; 其中n是多少种子发芽。 2.1.4 。加速老化这项测试是用来预测贮存潜力的种子。它结合了讲所致高温高压humidityto其中种子也许暴露出来。我们预计这种子地段纪录更高层次的萌发，在加速老化试验可以储存一一段较长的时间内，比别人。两个复制的50个种子则留在穿孔塑料盒等。 这些箱子存放在401c和100 ％相对湿度（比R ： H ：已）为每小时96发芽这些地段被记录为概述撞土改（无名氏， 1985年） 。 2.2 。测定水分含量标准烤箱法概述由土改（无名氏， 1985年）被聘用。三复制的10克种子被保存在一个热风烘箱，在1021c为24小时在这一时期结束时， 样品被转移到干燥器中冷却。样品，然后权衡和水分内容计算，就drymass基础。 2.3 。评估损害的，由于自由下落以确定影响身高的下降对种子质量， 3次重复的100个种子， 从每一次治疗，分别下降了，从高处的0.5 ， 1.0 ， 1.5 ，或2.0米就以一个水泥厂地板或镀锌铁楼。掉落的种子进行了萌发及活力作为前。 2.4 。数据的统计分析收集到的数据，在实验进行了分析用方差分析（无名氏， 1992年） studythe影响男： C组： ;进程的阶段和高度自由下落对参数的种子质量。 差异是指检验用tukeytest的意义。